SHOPMASTER CNC
Pricing and links at bottom of page
The SHOPMASTER CNC system is available in several
configurations, 3 and 4 axes stepper as well as 3 and 4 axes servo
systems. A CNC rotary table is also available.
- The Stepper system is a great starter and can perform
all the functions of a full machining center with the benefit of being
"foolproof" for beginners.
- The servo system is for more experienced machinists with
much higher feed rates available for increased production speed.
- Stepper system users can upgrade to servo after they
have more experience the cost of UPS to return their old system plus a
small fee to exchange the motors and upgrade the drivers.
- A CNC driven rotary table is available in both stepper
and servo version
- When ordered with your machine, the cnc system is
installed by us and ready to run.
- Our CNC enclosure is an integral part of your machine
for that professional look and function.
- SOFTWARE
-
SUPPORTED G CODES
G0
RAPID POSITIONING
G1
LINEAR INTERPOLATION
G2
CLOCKWISE CIRCULAR/HELICAL INTERPOLATION
G3
COUNTERCLOCKWISE CIRCULAR/HELICAL INTERPOLATION
G4
DWELL
G10
COORDINATE SYSTEM ORIGIN SETTING
G12
CLOCKWISE CIRCULAR POCKET
G13
COUNTERCLOCKWISE CIRCULAR POCKET
G15/G16
POLAR COORDINATE MOVES IN G0 AND G1
G17
X, Y PLANE SELECT
G18
X, Z PLANE SELECT
G19
Y, Z PLANE SELECT
G20/G21
INCH / MILLIMETER UNITS
G28
RETURN HOME
G28.1
REFERENCE AXIS
G30
RETURN HOME
G31
STRAIGHT PROBE
G40
CANCEL CUTTER RADIUS COMPENSATION
G41/G42
START CUTTER RADIUS COMPENSATION LEFT / RIGHT
G43
APPLY TOOL LENGTH OFFSET (PLUS)
G49
CANCEL TOOL LENGTH OFFSET
G50
RESET ALL SCALE FACTORS TO 1.0
G51
SET AXIS DATA INPUT FACTORS
G52
TEMPORARY COORDINATE SYSTEM OFFSETS
G53
MOVE IN ABSOLUTE MACHINE COORDINATE SYSTEM
G54
USE FIXTURE OFFSET 1
G55
USE FIXTURE OFFSET 2
G56 USE FIXTURE OFFSET 3
G57 USE FIXTURE OFFSET 4
G58 USE FIXTURE OFFSET 5
G59 USE FIXTURE OFFSET 6
G61/G64
EXACT STOP / CONSTANT VELOCITY MODE
G73
CANNED CYCLE- PECK DRILLING
G80
CANNED MOTION CYCLE ( INCLUDING CANNED CYCLES)
G81
CANNED CYCLE- DRILLING
G82
CANNED CYCLE-DRILLING WITH DWELL
G83
CANNED CYCLE- PECK DRILLING
G84
CANNED CYCLE-RIGHT HAND RIGID TAPPING
G85
CANNED CYCLE- BORING, NO DWELL, FEED OUT
G86
CANNED CYCLE- BORING, SPINDLE STOP, RAPID OUT
G88
CANNED CYCLE- BORING, SPINDLE STOP, MANUAL OUT
G89
CANNED CYCLE- BORING , DWELL, FEED OUT
G90
ABSOLUTE DISTANCE MODE
G91
INCREMENTAL DISTANCE MODE
G92
OFFSET COORDINATES AND SET PARAMETERS
G92.X
CANCEL G92 ETC.
G93
INVERSE TIME FEED MODE
G94
FEED PER MINUTE MODE
G95
FEED PER REVOLUTION MODE
G98
INITIAL LEVEL RETURN AFTER CANNED CYCLES
G99
R-POINT LEVEL RETURN AFTER CANNED CYCLES
Pricing
| Description |
Part # |
Price |
| 3 AXES STEPPER SYSTEM |
ST98 W3 |
2495.00
|
| 4 AXES STEPPER SYSTEM |
ST98 W4 |
3295.00
|
| 3 AXES SERVO SYSTEM |
ST98 S3 |
3495.00
|
| 4 AXES SERVO SYSTEM |
ST98 S4 |
4495.00
|
| STEPPER CNC ROTARY TABLE |
ST32 |
499.00
|
| SERVO CNC ROTARY TABLE |
ST32S
|
599.00
|
Send mail to shoptask@shoptask.com with questions or comments about this web site.
Copyright © 1981-2008
Shopmaster Manufacturing Inc.
All rights reserved.
This page was last modified on Wednesday April 30, 2008